Upsonic Industrial IP 10000VA Single Phase System
- Double Conversion Technology
Fully regenerated sine wave output independent of utility supply
- Constant Voltage Constant Frequency (CVCF) Programmable
For the highest quality output
- Customer Options Slot x 2
Real time Power, Battery and Load Status
- Galvanic Isolation Transformer
Ensures output is totally independent of input
- Smart Speed Controlled Fan
To extend UPS service life and reduce noise
3 year warranty (2 years on battery)
Using a field-proven Digital Signal Processor (DSP), the Industrial Series UPS performs as a truly user-friendly unit for easy operation and access to system information and unit customisation.
Dual input loops design provides a loop for rectifier and another for Bypass.
An easy-to-read LCD/LED display provides real-time power status such as input voltage, output voltage, battery voltage, battery level, load level, input/output frequency, temperature of inner cabinet, error code, UPS status, etc. A full-size graphical LCD display provides advanced monitoring functions that greatly enhances the easy to use operating interface.
The Industrial Series includes air forced cooling by internally mounted fans with fan speed adjusted according to load.
In Real ECO (Economic) operation mode, the power supplied to load is through the static switch. It will automatically transfer to inverter supply if bypass Utility/Mains AC is out of tolerance. A variety of communication options are offered, such as USB, SNMP, serial and true relay card.
Standard matching battery cabinets are available to extend the UPS runtime to several hours.
The Intelligent self-diagnostics inside the unit may help service engineers to check out failure points rapidly.
Automatic and Manual Bypass ensures continuous supply of power to the critical load in the event of electronic failure, overload, overheat or scheduled maintenance.
| Model || Industrial IP Series |
| || UPS-6000HTS || UPS-10000HTS |
| Capacity || 6KVA/5.4KW || 10KVA/5.4KW |
| Cold Start || Yes default frequency = 50Hz or settable |
| Acceptable Input Voltage || 50% ~125% (220VAC/230VAC/240VAC) |
| 100% load @ 80% ~ 125% |
| 90% load @ 70% - 80% |
| 80% load @ 50% ~ 60% |
| 65% load@ 50% ~ 60% |
| Phase || Single phase in, single phase out |
| Input Power Factor || >0.99 |
| Input Frequency Range || 40Hz - 70Hz |
| Frequency Adaptable || Settlable |
| Output PF || 0.9 |
| Nominal Voltage || 220/230/240VAC |
| Voltage Regulation || + 1% |
| Voltage Regulation || < 1% THD, Linear Load, < 5% THD, non-linear load |
| Battery Number || 12V/7AH* || 12V/7AH*16pcs |
| Efficiency (Line Mode) || 93% |
| ECO Mode Noise || 99% |
| < 48dB < 70% load 1m away |
| Overload Capacity (Line Mode) || < 58dB > 70% load 1m away |
| 110%: Transfer to bypass after 60 minutes |
| 130%: Transfer to bypass after 1 minute |
| 150%: Transfer to bypass after 30 seconds, shutdown after 1 minute. (Line Mode) |
| Crest Ration || 3:1 |
| Display || LED and LCD |
| RS232 || Standard cable support INVT Power Monitor |
| SNMP Card || Power Management from SNMP Manager and Web |
| Dimensions (L X W X H) in cm || 53 X 25 X 64 || 53 X 25 X 64 |
| Net Weight (kg) || 58 || 64.5 |