Sunix USB2311C one USB 3.1 Enhanced SuperSpeed Type-C Single port PCI Express Host Card (NO cable including in)

Sunix USB2311C one USB 3.1 Enhanced SuperSpeed Type-C Single port PCI Express Host Card (NO cable including in) Specifications Hardware BUS PCI Express Spec 3.0, Single-Lane (x1) Controller PCI Express USB 3.1 Host controller, Asmedia ASM1142 USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1 IRQ & IO Assigned by System USB Communication Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1 Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps) No. of Port 1-port PCB Connector USB 3.1 USB Type-C port (Downstream Facing Port) Protection ±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge Power Source +5VDC / SATA Power Connector Type Output Capacity USB Type-C Port: +5VDC / Maximum 3.0A / each port Note: Total power output capacity will be limited by system power supply. Over Current Protection USB Type-C Port: +5VDC / Maximum 3.7A / each port Power Consumption 1.1 W @ 3.3V (board only without power output to USB device) Driver Support Windows Windows 7 (X86/X64) Windows 8.x / 10 (X86/X64) (Windows in-box driver) Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver) Environment Operation Temperature 0 to 60°C (32 to 140°F) Operation Humidity 5 to 95% RH Storage Temperature -20 to 70°C (-4 to 158°F) Regulatory Approvals EMC CE, FCC, VCCI, BSMI Green RoHS, CRoHS, WEEE Physical Characteristics PCB Dimension 65.7 x 68.5 mm Bracket Standard 120 mm (Low Profile 80mm) Bracket Space 1