'The OAK-SoM-IoT is an embedded variant of the OAK-SoM that includes a 128MB NOR flash, and boot-switch capabilities such that it can be booted over USB or set to boot out of NOR-flash, for communication with microcontrollers over SPI.
The key difference between OAK-SoM-IoT and the standard OAK-SoM is that the latter requires a host processor, running Linux, Mac, or Windows to operate, whereas this module can boot out of NOR flash - allowing SPI communication with microcontrollers which may be running no operating system at all (bare metal C or C++ code). This module is included pre-mounted on the OAK-D-IOT-40, which is our embedded DepthAI reference design.
Features:
2x 2-lane MIPI Camera Interface
1x 4-lane MIPI Camera Interface
Quad SPI with 2 dedicated chip-selects
I²C
UART
USB2
USB3
Several GPIO (1.8 V and 3.3 V)
Supports off-board eMMC or SD Card
On-board NOR boot Flash (optional)
On-board EEPROM (optional)
All power regulation, clock generation, etc. on module'